Executive Standard
  This product is manufactured in line with the general industry standard entitled Q/AXHTD07-2000 which refers to the JGS. 

  Usage
  It is suitable to be used for the copper-cored or copper alloy-cored plastic insulating and sheathed branch cable for power, electrical and lighting device whose AC rated voltage is 0.6/1kV in residential areas, high-rise office buildings, tunnels and factories, which is quite easy to install.

  Model and Name

  Description of Each Code in Model

  Examples
  This product is mainly described by model, specification, numbers of core, nominal cross-sectional area of the main line, nominal cross-sectional area of the branch cable, insulating effectiveness, color and the standard number. For instance:
  FZVV-O. 6/1kV 1 × 185 (95) or Q/XH11 or QIAXHT007-2000 can be made use of to represent the single-core, copper-cored polyoxyethylene insulating Yun poly ethylene sheathed branch cable with the main line’s cross-sectional area at 185mm2 and the branch line’s cross-sectional area at 95mm2.

  Characteristic Features
  ① Rated voltage (Uo /U): 0.6/1kV.
  ② The highest long-term allowable working temperature for the cable’s conductor:
It is 70℃ for the PVC insulated cables while 90℃ for the XLPE insulated ones.
  ③ The ambient temperature should not be less than 0 ℃ while laying the cable. When it is below 0℃, it should be pre-heated in advance.
  ④ The recommended bending radius of the cable should be no less than 12 times of its outer diameter.
  ⑤ The conductor’s DC resistance of the cable is shown in Table 3 while the insulation resistance is supposed to be no less than 200MΩ.
  ⑥ The molded branch section of the branch cable should be able to withstand the heat cycle test for 250 times.
  ⑦ The branch cable is supposed to be able to withstand the 3.5kV/5min AC voltage test.